Hardscape Systems is a great way to create amazing seatwalls and related hardscape features faster and easier than using conventional methods. The patented forming system allows quick modifications to design, saving time and aggravation. Check it out and imagine what you can do!
For more information be sure to see the Hardscape Systems YouTube channel
New to using seamless skins? Have you been using them but find it difficult? Take a quick look here to see if it clears it up for you. Concrete seamless skins are a fantastic way to texture your concrete surfaces. They are quick and easy to use. Don't be afraid.
The first step in determining the wear level of your colored concrete driveway is a simple visual inspection. One of the more obvious signs that you’re due for a driveway refresh is noticeable surface wear or damaged / missing sealer. The first line of defense against the elements, your concrete sealer needs to be high quality, consistently applied, and intact to ensure your surfaces stay looking great. If it’s compromised, it’s a safe bet that your concrete color, as well as its overall visual integrity, isn’t far behind.
It may be time for driveway rejuvenation if…your sealer has worn away.
If there’s a distinct visual difference in your concrete color shading or stain over time, it’s time to reapply. Fading isn’t a process that slows or stops; once it begins, it’s likely to lighten or discolor more rapidly as time goes on. If you have patterns, decorative elements, or distinct color boundaries, this fading will be even more obvious. You can fight fade by using high quality products, prepping the concrete surface as directed, and applying your new stain consistently - just don’t forget your sealer!
It may be time for driveway rejuvenation if…your concrete color has faded noticeably.
A well-prepared surface will give you the most consistent color application and the best longevity for your Re-Ax concrete stain product. A few simple steps - with the right equipment and products, of course - will give you the perfect uniform “canvas” for achieving the look you desire on your driveway, walkway, or other concrete surface.
Using a power washer is the best way to clear off stubborn dirt, debris, and residue, but you can also speed up the process with a thorough sweeping beforehand. This will prevent small pebbles, dirt buildup, and other outdoor contaminants from causing a patchy or uneven application of color. Even if a worn or variegated look is your goal, this step ensures you have as much control as possible over the finished look, post-concrete staining.
While not all concrete surfaces will require the use of media blasting to remove a surface layer, if you have existing remnants of stain, coating, or sealant, this step is a must. Unintentionally layering new color over old color may create an unwanted shade, and old, compromised sealant can interfere with the protection offered by your new sealant application.
In addition to media blasting techniques, purpose-made products also make this step efficient and minimize hassle. Tru Strip, for example, is an excellent way to strip away color and excessive sealer build up, safely removing unwanted coatings quickly and easily.
Why Choose Tru Strip Coating Remover?
Repeat Power Spray after Tru Strip
Once Tru Strip has been applied and allowed to work, use your power washer to spray it away and let your concrete surface dry before applying Re-Ax concrete stain. By properly cleaning and prepping your concrete, you’ll enjoy a smooth, even stain application process and result, with excellent hue saturation.
Rinsing down your concrete surface with water prior to applying Re-Ax Reactive Stain ensures you achieve excellent results across the largest possible area. By pre-wetting the surface, ideally with a power sprayer, the Re-Ax product can quickly and easily penetrate and spread. This fast, easy primary step helps eliminate inconsistent color areas that can occur on dry surfaces as they absorb the mix.
Mix Re-Ax Color and Water
Following your Re-Ax Concrete Color Product directions, mix product activator if required(Black Walnut and Mossy Brown). Fill your clean, dry sprayer tool reservoir and prepare to apply the mixed product across your concrete surface.
Apply Re-Ax in Circular Motion
Using a gradual, consistent circular motion, use your sprayer tool to apply your Re-Ax Concrete Color to your pre-wet surface. This technique will achieve the best coverage without leaving behind lighter, patchy areas, and makes the most of each preparation of Re-Ax Color Stain for an efficient, beautiful finish.
Allow To Completely Dry
Plan to apply your Re-Ax Reactive Stain on a day with moderate temperatures and sunny weather, in order to facilitate quick drying. The stain will change from the purple color to a pinkish brown then gradually the final color. This can take 15 minutes to several hours depending on the surface temperature and air temperature. Warmers days result if quicker color changes. Once completed it is a good idea to give the surface a rinse off(not pressure washer) to get rid of excess stain that is just sitting on the surface. It will be a dry brown powder. Be aware that when rinsed, the surface may turn pink again in some cases. It is temporary. The pink will change back to the finish color as the surface dries. This can also happen when sealing with a water base sealer. It will correct as the sealer dries.
Your concrete surface, whether it’s a driveway, pathway, or other application, is built to last - but wear-and-tear and weather are always ready to do their worst. The right concrete sealer makes all the difference!
Whether you want to prevent slips around a pool deck or just want your concrete to stay looking beautiful all year round, Tru Grip is a must. This sealer additive is easy to use and hardworking, just like the rest of our concrete stain, sealant, and treatment range.
Use a blower to remove any leaves, debris, sticks, and other contaminants. This will allow your sealant to go on smoothly and in an even layer.
Use one 16oz container of Tru Grip to every 5 Gallons of Stamp Sheen 350, as per the on-container instructions. Apply as directed.
Use your sprayer to apply two thin layers, and allow the first layer to dry before applying the second. Protect any surfaces that should not be sprayed such as garage doors, siding etc. with tarps, painter’s tape, or similar materials. Use a brush attachment to apply on or near stairs for full coverage.
Protect surroundings
Use a brush for stairs
Walttools teamed up with Concrete Countertop Solutions for a training class to demonstrate their Z Form countertop system with the Walttools' Modular Kitchen Panel system. It was an informative class that showed how quickly an outdoor kitchen can be set up using all these great products.
The Courtyard cobble is the perfect blend of rustic detail and function. The well-worn and weathered limestone exhibits a good number of pits and defects coupled, but has an almost smooth surface to eliminate most problems with rustic cobbles. Many cobbles are unsuitable for patios and the Courtyard is a welcome exception. This will leave you with a surface that is easy to walk on AND place furniture on without the wobble of a traditional cobble.
Stamp includes: 3 rigid stamps, 1 floppy stamp, 1 touch-up skin
The various sizes of stones will take color very nicely and can be finished in a variety of ways.
Overall length 48" x 23.5"
20 lbs / stamp
Copyright © 2026 The Contractor Source. All rights reserved. Website By AdeptPlus.