Product Description
Walttools WBU-M is a water-based, two-component, chemical resistant, self-cross-linking polyurethane coating. The subtle matte finish offers excellent abrasion, chemical, and stain resistance, along with superior color retention. It is ideal for concrete floors and walls in garages, restaurants, warehouses, storage facilities, aircraft hangars, animal clinics, and vehicle service centers where you are looking for a non-intrusive look that hides long-term wear. WBU can be pigmented. This is often used as a hardy topcoat for coatings such as Walttools Epoxy HP. Walttools WBU can be used equally well on vertical or horizontal surfaces. This will provide a surface that is very natural and almost unchanged when sealed.
- UV-resistant
- Superb abrasion, chemical, and stain resistance
- Suitable for both exterior and interior surfaces
- Apply by spray, roll, or microfiber applicator
- VOC-compliant and low-odor
- Excellent elasticity and elongation properties
- Early water resistance
- Also available in high-gloss
- 32% solids
- 4:1 mix ratio (4 part A: 1 part B)
- 5 Gal kit
- Coverage approx. 350 sq ft per gallon
Containers with the kit may not always be full and are often designed to be the mixing container for your project. Professional use only.
Water Based Urethane Low Gloss Coating Technical Information
WBU M Data Sheet Part A SDS Part B SDS
This is a great sealer for stain and seals. It leaves a nice satin sheen and a touch of color enhancement. It hides wear and tear very well and does not stain with much of anything. It rolls out very easily and cures quickly. We have also tinted it at times to great effect.
I have been using this for concrete countertops for a year now and I have had no issues at all. It goes down easy and cures within a couple days. My customers really like the low gloss aspect of this coating.
I used this to use as a mid range sealer for an old concrete basement floor after it was dyed to give it a little character. This sealer was much easier to put down than I thought. 2-part sealers scare me. It rolled out easy and dried pretty fast. I was walking on it after about 6 hours. Clean up was easy. Just threw the roller away and washed the tray.
I used this on our concrete countertop. It seemed a bit soft for a few days so I called. Turns out I put it on a too heavy andt he guy there told me full cure on this kind of sealer is 5-7 days. Wow, what a difference now. This stuff will hold up to a bomb blast I think. Thanks Walttools!